H4G 4000×8000​ (4 Gunty)

Heavy Duty Gantry CNC plasma and flame cut  #H4G4000X8000

Technical index:

Machine structure spare parts

Component introduction

Name of each part of the equipment

Longitudinal drive control system

Vertical use of double gear rack meshing drive, coupled with high-precision reducer, coupled with speed and position feedback, to achieve high-precision positioning drive.

Lateral drive control system

The high precision single shaft guide, to achieve the same as the mirror and move smoothly in the torch through the wire device between master and slave.

Pneumatic transmission mode

In the longitudinal direction of the mobile machine has a lot of work cable, grounding cable and gas source, this vertical moving load, running stability and reliability of this will affect the machine, the towline servo mechanism to ensure the pipeline, clean, and can reduce the overshoot tendency in turn when the high speed machine bay. Because the cutting movement of high-speed cutting to prevent damage to the pipeline running at the same time, the length of the pipe can be unnecessary surplus.

Guide

The vertical guide rail is made of heavy rail with 24kg/m of high strength and heavy load finishing, and the top and two sides are machined by special grinding machine. The horizontal guide rail adopts imported precise cold drawn profiles, which are used after precise machining. A heat treated heavy load rack is arranged on the outer side of the guide rail. It guarantees the high precision and long life of the transmission. Thus ensuring the high precision and stability of the cutting machine during the whole working period.

The plasma torch anti-collision device

360 degrees by sensor control, anti-collision mechanism, once the plasma torch has any direction impact machine stop motion.

NC rack

The whole body is made of Gantry milling and processed at one time. The frame is made by boring machine at one time. With strict assembly standard and technology, the cutting accuracy of each machine tool is guaranteed.

The hollowed out steel plate welding body is easy to dissipate heat and increases the service life of the equipment.

Machine tool beam width 600mmX300mm,strictly according to the standard heavy structure design and processing.

Working conditions

Suggestion Power source cut-200

cut200 :Piece20~25mm Maximum edge cutting capacity:35mm

1. Controller system F2300B
2. All Chinese / English menu system
3. 45 kinds of commonly used graphic libraries, including grid graphics, can be set .
4. support EIA code (G code) and FastCAM, FreeNest, SmartNest, IBE and other kinds of nesting software.
5. figure ratio, rotation, mirror image
6. graphics can be arranged in matrix, arranged alternately and stacked.
7. graphics steel plate correction, any steel edge can be used as correction edge.
8. you can self diagnose all the IO status and key state of the system, so that it is easy to check and troubleshoot.
9. front U disk interface, convenient for program transmissi
10. system upgrade using U disk upgrade method, convenient and practical, provide lifelong free upgrade service. All the functions and processes of the whole system can be upgraded online, so as to avoid the worries of after sale.
11. support edge cutting. For thicker steel plate, preheating time can be reduced.
12. according to the thickness of the steel plate, the speed limit can be automatically controlled at the corner, so that it can effectively prevent overheating.
13. manually select the starting line or select the perforation point.
14. dynamic / static processing graphics display, graphics enlargement / reduction, dynamic tracking of cutting point in magnified state.
15. DSP high speed, high precision interpolation control, high speed operation, smooth operation, low noise.
16. arbitrarily setting the starting speed and the time of rising and lowering.
17. memory function with power break and breakpoint protection
18. “offset cutting” function can avoid plate waste due to miscalculatio
19. you can set up different administrative permissions and corresponding passwords to maintain the management’s rights and interests.
20.  remote control can be carried out on the front, back, left, right and cutting movements, such as start and stop, and so on.

The main features are as follows:

Hongyuda THC-100

1. the operation interface has a variety of practical instructions, such as collision indication, ascending and descending indication, etc. the interface is beautiful and the function is more complete.
2. the anti-interference performance is stronger.
3.  add dynamic perforation function, suitable for all kinds of large plasma cutting, prolong the life of wearing parts. It can accept the Dynamic perforation control of level signal and pulse signal and use flexibly.

 Star CAM nesting software introduction

1. to avoid and reduce the cutting space between parts and improve the utilization rate of steel.
2. the common edge cutting to cut one or two edges of each rectangle, effectively reducing the cutting stroke and improving the cutting efficiency.
3. the common edge cutting using the cutting edge preheating, avoiding the perforation, reducing the preheating time, and improving the cutting efficiency.
   • The cutting nozzle and the consumables are effectively saved.

Equipment delivery information:

1. Provide an operating manual
2. Provide a complete set of basic installation drawings
3. Provide a set of safe operating procedures

After-sales service

1. ติดตั้งและทดลองให้เสร็จ ครั้งแรกและอบรม2ครั้งโดยไม่มีค่าใช้จ่าย
2. ค่าบริการเสริมครั้งต่อไปสำหรับลูกค้ากรุงเทพภายในระยะทางไม่เกิน90กิโลเมตร ครั้งละ 3,500บาท
3. สำหรับลูกค้าต่างจังหวัดภายในระยะทางไม่เกิน150กิโล ครั้งละ 6,500บาทหรือตามที่ตกลง

About components of machine

บริษัทขอสงวนสิทธิ์ที่จะเปลี่ยนแปลงองค์ประกอบของเครืองซีเอ็นซีบางรายการตามความเหมาะสมโดยที่ไม่ทำให้ประสิทธิ์ภาพการใช้งานของเครื่องลดลง