Punching Shearing Machines Q8/10/12/16/20/25/30/40/50

Punching Shearing Machines Q8/10/12/16/20/25/30/40/50

Product code: 000348
รหัสสินค้า: 000348 หมวดหมู่:

 

MODEL
Q35Y-16
IW-60T
Q35Y-20E
IW-90T
Q35Y-25E
IW-110T
Q35Y-30E
IW-140T
Q35Y-40E
IW-200T
Q35Y-50E
IW-300T
PRESSURE(T) 60 90 110 140 200 300
MAX SHEARING THICKNESS(mm) 16 20 25 30 40 50
STRENGTH(N/mm2) ≤450 ≤450 ≤450 ≤450 ≤450 ≤450
SHEARING ANGLE
DIMENSION ONE STROKE CUTTING
(WALL×WIDTH)(mm)
16×250
8×400
20×330
10×480
25×330
16×600
30×330
20×600
35×400
25×700
40×400
30×750
SLIDER STROKE(mm) 80 80 80 80 100 100
STORKE TIME(/MIN) 6 8 6 8 8 8
THROAT DEPTH(mm) 300 355 400 600 600 600
PUCNHING THICKNESS(mm) 16 20 25 28 35 40
HOLE DIAMETER(mm) 25 30 35 38 40 40
MOTOR(Kw) 4 5.5 7.5 11 15 18
DIMENSION(mm)
1650×800
×1780
1950×900
×1930
2350×980
×2100
2680×1060
×2380
2770×1240
×2350
3000×1440
×2450
GROSS WEIGHT(Kg) 1900 2600 4800 6800 9200 12800
PROFILED STEEL ROUND BAR SQUARE BAR EQUAL ANGLE IRON H CHAANEL C CHANNEL
90°CUTTING 45°CUTTING
Q35Y-16 45 40×40 120×120×12 70×70×8 126×74×5 126×53×5.5
Q35Y-20 50 45×45 140×140×12 70×70×10 160×86×6 160×60×6.5
Q35Y-25 60 50×50 160×160×14 80×80×7 200×102×9 200×75×9
Q35Y-30 65 55×55 180×180×16 80×80×10 280×124×10.5 280×86×11.5
Q35Y-40 70 60×60 200×200×18 100×100×10 300×126×11 300×89×12
Q35Y-50 80 65×65 200×200×20 120×120×10 320×130×10 320×92×1
Q35Y series hydraulic ironworker adopt hydraulic driving system. Ironworker can cut punch all kinds of holes. Various metal plates, square bar, angle steel, round iron, flat bars, profiled bars, channel steel and joist steel can be cutted, punched and notched on the machines.
1. Shearing Station
a. Round & square bar shearing: there are multiple holes for a varity of sizes. Adjustable hold down device is convenient for shearing various sizes of round and square bar, channel, joist, etc.
b. Flat bar shearing: large 15″ squraing arm with inlaid scale as standard equipment. Special anti-disorted blade for quality cutting. Lower blade has four usage edges. There is screw allow for gap adjust no shim needed.
c. Angle iron shearing: the angle iron shear has the ability to cut angle iron at 45 degrees & 90 degrees withe diamond shaped blade. e.g.

This gives the operator the ability to make a picture frame corner for perfect welds.

d. Diamond shaped blade for quality cuts that is minimal material wast. Easily adjustable hold-down device for accurate plate cutting.
2. Puching Station
a. Largw viewing window on stripper.
b. Swing-away dwsign for easy operation.
c. Available unique style allows for large angle iron punching and large channel punching.
d. Quick change coupling nut and sleeve for rapid replacement change
e. Large two pieces gauging table with rules and stop as standard equipment.
3. Notching Station
a. Unique design for unsurpassed cutting of angle and flat bar.
b. Electrical interlock safety guard and three gauging stops for precise positioning.
c. with ventilated device for good visibility.
d. The notching station also has an oversized table with material stops.
4. Electronic backgauge device
a. With 3 supporting feet.
b. Fine adjustment assures precision cuts.
c. Fully protected electrical hardness for safety and reliability.
d. Large contact button for high efficiency productivity.

Start typing and press Enter to search

Shopping Cart

ไม่มีสินค้าในตะกร้า

error: ห้าม Copy นะจ๊ะ