เครื่องยืดไฮดรอลิก YZJ-60D H Beam
| Corrected plate thickness | 6-60mm (Q345 material is 6-40mm) |
| Wing width | 200-800mm |
| Web height | ≥160mm |
| Workpiece material | Q235-A |
| Correction speed | 9.8m / min |
| Main drive motor | 15KW |
| Hydraulic station motor | 5.5KW |
| System working pressure | 25Mpa |
The thickness and width of the H-shaped steel flange plate must comply with the following table, the material is Q345
| s | 6-20 | 20-30 | 30-40 | 40-50 | 50-60 |
| b | 200-800 | 350-800 | 500-800 | 6050-800 | 750-800 |
Related Products
-
Partition assembly machine
Technical function This machine is a special equipment for the assembly and welding of the middle partition of the box beam. When the partition is assembled, it is pressed and positioned by the cylinder…
-
Cantilever fuse electroslag welding
Technical function Fused wire electroslag welding uses a special conductive tube. During the welding process, the welding wire is continuously fed into the conductive tube and continuously improved. The…
-
เครื่องเชื่อม H-Beam แบบลูกฟูก Corrugated web H-beam welding machine
฿1,560,000.00Technical function The corrugated web H-shaped steel welding machine uses a five-axis linkage CNC system to control the movement of the welding gun and the visual tracking feedback system in the X, Y, a…
-
เครื่องกัดขอบเหล็กบีม Press beam mobile edge milling machine
Technical function This equipment is a large-scale milling equipment. It can mill both sides of the workpiece at the same time. Four power heads are installed on the bed, which can greatly improve the p…
