เครื่องยืดไฮดรอลิก YZJ-60D H Beam
| Corrected plate thickness | 6-60mm (Q345 material is 6-40mm) |
| Wing width | 200-800mm |
| Web height | ≥160mm |
| Workpiece material | Q235-A |
| Correction speed | 9.8m / min |
| Main drive motor | 15KW |
| Hydraulic station motor | 5.5KW |
| System working pressure | 25Mpa |
The thickness and width of the H-shaped steel flange plate must comply with the following table, the material is Q345
| s | 6-20 | 20-30 | 30-40 | 40-50 | 50-60 |
| b | 200-800 | 350-800 | 500-800 | 6050-800 | 750-800 |
Related Products
-
เครื่องประกอบข้ามคอลัมน์ Cross column assembly machine
Technical function The cross column assembly machine is a special equipment for assembling the welded H-shaped steel and T-shaped steel into the cross column. It adopts the frequency conversion speed co…
-
เครื่องกัดขอบเหล็กบีม Press beam mobile edge milling machine
Technical function This equipment is a large-scale milling equipment. It can mill both sides of the workpiece at the same time. Four power heads are installed on the bed, which can greatly improve the p…
-
Degree hydraulic turning bracket
Technical function In order to reduce the frequency of driving and improve the efficiency of transfer and turnover, we have configured hydraulic mobile turnover machine, steel movement machine, turnover…
-
Cantilever fuse electroslag welding
Technical function Fused wire electroslag welding uses a special conductive tube. During the welding process, the welding wire is continuously fed into the conductive tube and continuously improved. The…
